error code 46 on 9655 allis

I have an Allis 9655 with the error code 46 and the tractor stopped moving.. The tractor sat oveenight and it started and moved fine. stopped tractor and then it would not move again.Any suggestions

Don't know if this will help.7740 ford with E46 code
Chester I have a 1997 7740 ford sle showing an error code e46 does anyone know what this means it has stopped moving. thanks
Randy I have a 94 7740 and it came up with this code and would stop moving. I called the dealer and they could not find this code in the book and they where going to call the factory but never called back. I changed all the hydralic filters and that has seemed to help so far.
A.J. Kielian we have a 6640 with E 46 code it stop moving. we changed all hydr. filters and the code will not clear.
Harvey I have a 6640 with a code e24 it won't move until clutch is released to the top then it jumps. What causes this?
michael e46 is usually a follow uo to a blown fuse something to witht he gearbox. i drove a 8340 sle and it brought up e46 but it goes away when the fuse is replaced, i dont know what the fuse is but this problem happened after the e41 code came up
t e46 on the 7740 is #12 fuse blown dont know if it is the same might look
t the #12 fuse is located in the bottom left corner of your fuse box on the right hand side of steering box in the cab. hope this will help

Thanks for the help I did see those posts earlier and am waiting for a filter and will try it. thanks again