dual 105

paleybilt · Apr 9, 2016

I have an old Ford 1700 with a Dual 105 loader Last year I rebuilt the 2 main cylinders and things worked pretty good, Lately my loader can barely lift a 100 lbs. and it shudders and shakes and is pretty close to useless, any suggestions?

flying belgian · Apr 9, 2016

low on oil.

vscummins · Apr 9, 2016

Low on oil or plugged hydraulic filter

vscummins · Apr 9, 2016

Have you looked at the hydraulic oil is it milky ?

MDFJ · Apr 10, 2016

As everyone else said. I agree.
Are the hoses shaking when using the loader???
If full of oil and this happening. You might have to check the control valve for the bucket controls.
You may have a broken relief valve spring?
Or is the Hyd. Filter plugged??
I Would check out all of the simple things as posted before going any deeper.
Is it shuttering at the beginning of lifting? Or all of the time?
If at the beginning, Then Poss. the lift cylinders piston deceleration valves are installed wrong (They slow the piston in the Cylinder from slamming down) If it has it?

paleybilt · Apr 10, 2016

(quoted from post at 21:04:21 04/09/16) Low on oil or plugged hydraulic filter

Thank you

dual 105

paleybilt

New User

flying belgian

Well-known Member

vscummins

Well-known Member

vscummins

Well-known Member

MDFJ

Member

paleybilt

New User

Similar threads