Unstyled B

41106 · Apr 6, 2016

Will a No. 5 sickle mower fit properly on an unstyled B? Thank you in advance....looking forward to reading responses, comments, and suggestions!

RLA · Apr 6, 2016

With the proper mounting brackets made for a un styled drawbar support
& it wouldn't hunt to have a #5 with the smaller spline PTO Shaft.

James Howell · Apr 6, 2016

Agree with both recommendations by [b:654c4848f0]rla[/b:654c4848f0].

"<font color="#6699ff">[b:654c4848f0][i:654c4848f0]With the proper mounting brackets made for a un styled drawbar support[/i:654c4848f0][/b:654c4848f0]</font>".

Take a look at the diagram below.

Note the rear drawbar support (Key 7) and drawbar support (Key 9).

Take a look at the photo below.

Take a look at the diagram below.

"<font color="#6699ff">[b:654c4848f0][i:654c4848f0]it wouldn't hurt to have a #5 with the smaller spline PTO Shaft[/i:654c4848f0][/b:654c4848f0]</font>".

Take a look at the diagram below.

Note the square shaft (Key 5) and universal splined joint (Key 6).

Take a look at the description below.

The shaft is either 14 1/2" or 18".

The universal splined joint is 1 1/8".

Hope this helps.

Unstyled B

41106

Member

RLA

Well-known Member

James Howell

Well-known Member

Similar threads