Don't know this term...

Dave H (MI) · Feb 23, 2016

...someone help me out. Ad for field cultivator. "Walking tandems"? It's a three section, folds up flat. Don't know what walking tandems means?

VicS · Feb 23, 2016

Its two wheels on a beam, centered on the arm where the wheel would be. That way both tires are always on the ground. Clear as mud?

fixerupper · Feb 23, 2016

The tandem transport and gauge wheels are on a beam that pivots in the middle so when one wheel goes up over a bump the other wheel goes down. It's an equalizer of sorts.

jeffcat · Feb 23, 2016

Hey that is the same as some John Deere tractor front ends. Like the tractor is wiggling it's toes.

Tom OConnor · Feb 23, 2016

Dave, Here is a picture of a set on a chisel plow. They are mounted on a beam that pivots in the center and the tires are mounted one ahead of the other. They are a tremendous advantage in rough ground. A lot of implements have them on the wings also. They take a lot of the shock out of hard rough ground and let the implement work at a more constant depth.

red.green · Feb 23, 2016

I assume there talking about the tires and frame configuration. What their stating is that there are two pair of wheels mounted on a short frame may be five two six feet long. The short frame has a pivot point in the middle that it follows the contour of the ground. I attached an Internet picture as an example.

Tom OConnor · Feb 23, 2016

Here is the picture.

JD Seller · Feb 23, 2016

Dave the term means it has a walking beam with tires at each end with a pivot in the middle. The advantage is that it cuts any grade changes in half. Example: you drop one wheel into a six inch deep hole. With a regular single wheel the machine would drop the whole six inches. With a walking tandem it would only drop three inches as one tire would still be up a ground level. The walking tandem makes the field cultivator hold depth better.

Here is a picture of a field cultivator with walking tandems.

davpal · Feb 24, 2016

Here's mine. Basically the same cultivator without the walking tandems. I've got flat ground so it works great for what it is.

Dave H (MI) · Feb 24, 2016

I get it, thanks! It was running kind of low in price and thought I would bid on it. Now it is running a bit higher and with all the snow on the horizon I don't think I could get there soon enough to suit the auctioneer. Appreciate the info!

Frank 41 · Feb 24, 2016

A Hendrickson truck suspension is simular in that the front and back axles pivot on a rubber bushing centered between the two axles. Rough riding like the Mack camelbacks.

stonerock · Feb 24, 2016

I like duel wheels better than walkin tandums, with walkin tandums more bearings to go out and one flat and your done

Don't know this term...

Dave H (MI)

Well-known Member

VicS

Well-known Member

fixerupper

Well-known Member

jeffcat

Well-known Member

Tom OConnor

Member

red.green

Member

Tom OConnor

Member

JD Seller

Well-known Member

davpal

Member

Dave H (MI)

Well-known Member

Frank 41

Member

stonerock

Member

Similar threads