Looking for a rotary cutter

rrman61 · Feb 20, 2016

I am looking for a used 10-15 foot 540 pto rotary cutter(bushhog).I live in south west La.Is there a source or website that has used ag equipment?I am willing to travel 200 miles or so

jicaseman89 · Feb 20, 2016

(quoted from post at 21:26:16 02/20/16) I am looking for a used 10-15 foot 540 pto rotary cutter(bushhog).I live in south west La.Is there a source or website that has used ag equipment?I am willing to travel 200 miles or so

try external_link.com

JD Seller · Feb 21, 2016

Tractorhouse.com has a lot of listings for rotary cutters.

Eldon (WA) · Feb 21, 2016

(quoted from post at 21:26:16 02/20/16) I am looking for a used 10-15 foot 540 pto rotary cutter(bushhog).I live in south west La.Is there a source or website that has used ag equipment?I am willing to travel 200 miles or so

Lots here, you can narrow the search field.
http://www.external_link.com/list/l...mp;SO=2&btnSearch=Search&units=metric

Eldon (WA) · Feb 21, 2016

(quoted from post at 21:26:16 02/20/16) I am looking for a used 10-15 foot 540 pto rotary cutter(bushhog).I live in south west La.Is there a source or website that has used ag equipment?I am willing to travel 200 miles or so

Lots here, you can narrow the search field.
http://www.external_link.com/list/l...mp;SO=2&btnSearch=Search&units=metric

Eldon (WA) · Feb 21, 2016

(quoted from post at 21:26:16 02/20/16) I am looking for a used 10-15 foot 540 pto rotary cutter(bushhog).I live in south west La.Is there a source or website that has used ag equipment?I am willing to travel 200 miles or so

Search Tractorhouse

macec3(TX) · Feb 21, 2016

From SW Louisiana to Houston is less than 200 miles. Eddie Knox at Knox equipment is cheaper on a new Howse rotary cutter than any I have found.
He was on Little York in north part of Houston. May have moved to his new location by now.
Bought a 10' Howse from him about 3 years ago. Well satisfied with it.

notjustair · Feb 21, 2016

Don't buy a Deere. I bought a 1508 years ago and have hated it everyday I've used it. The PTO is a mankiller to put on. If you try to turn at all it doesn't mow a big swath. It doesn't have enough tip speed for a decent job.

Oh, and they apparently have discontinued the cap/dipstick so I can't keep it folded in the winter because one of them leaks. I hate that thing. Did I mention that? I have nearly all Deere implements and I can't even be nice about it!

kent@junction · Feb 21, 2016

I will second not a Deere, we have a 6 ft that is a good grass smasher unless you take a half swath. Traded a 6 ft Bushog brand that was worn out twice over that cut better than the brand new Deere. Wish I had the old one back but they sold it before we realized what this thing was. Will say it pulls easy cause it doesnt do anything.

Dean · Feb 21, 2016

Too bad your not closer as I have a Woods MDS1260 10 1/2' cutter in new condition (less than 10 hours) that I have little use for due to changing plans. I just sits in the barn collecting dust, though I do wipe it down and put a new coat of wax on it every year or so.

Try Tractorhouse and Machinery Petes.

Dean

rrman61 · Feb 21, 2016

Are the land pride cutters any good?

rrman61 · Feb 21, 2016

Dean,where are you located?

Eldon (WA) · Feb 21, 2016

(quoted from post at 08:53:47 02/21/16) Are the land pride cutters any good?

I put lots of hours on 6' Landpride mowers and they did a good job....just keep the wheel axle greased well or it will wear out. I switched to an 8' Deere and was disappointed in the cut also. The blades have a 1/4" leading edge, so more tuned to cut brush and not grass. I switched to an 8' BushHog and love it. Sharper blades take less power and cut grasss like a lawn mower.

Looking for a rotary cutter

rrman61

Well-known Member

jicaseman89

Member

JD Seller

Well-known Member

Eldon (WA)

Well-known Member

Eldon (WA)

Well-known Member

Eldon (WA)

Well-known Member

macec3(TX)

Member

notjustair

Well-known Member

kent@junction

Member

Dean

Well-known Member

rrman61

Well-known Member

rrman61

Well-known Member

Eldon (WA)

Well-known Member

Similar threads