Early ford 9n front axle pin

Creeper2049 · Dec 15, 2015

I have an early ford 9n with a front axle that has a bolt going through the top. I am looking at removing it due to the previous owner bending the radiator support to non usable now. I am wanting to install an 8n axle support which should bolt up fine but how do I get the axle support off the axle? Should I take it to have it pressed out? Any tips or experiences? Thanks

W_B · Dec 16, 2015

(quoted from post at 06:41:38 12/16/15) I have an early ford 9n with a front axle that has a bolt going through the top. I am looking at removing it due to the previous owner bending the radiator support to non usable now. I am wanting to install an 8n axle support which should bolt up fine but how do I get the axle support off the axle? Should I take it to have it pressed out? Any tips or experiences? Thanks

Go on over the the 9N/2N/8N forum with the question. Plenty of guys there that have done this many times. One fellow there even sells good replacements that he machines.

Early ford 9n front axle pin

Creeper2049

New User

W_B

Well-known Member

Similar threads