govenor

Kenfarmall · Dec 7, 2015

I was on here about a month ago with a question about my farmall H, gas was seeping out of the gas cap. Thank you for helping me solve the problem. I now have another question and hope you can help me with it. How do I adjust the govenor? It idols alright but when I try to rev it up I do not have a lot of
RPM's. There is not much difference between the throttle being fully closed and fully open. this tractor starts and runs good but no high RPM,s. Can anybody help me. Appreciate any help
Ken

Goose · Dec 7, 2015

Once a governor is set initially, it normally doesn't need re-adjustment. You didn't by chance have the carburetor off and didn't get the linkage aligned properly when you re-installed it, did you? That can be kinda tricky on H's, M's, etal. The actuator from the governor needs to be properly set in the slot in carb. It's easy to miss, even if you know what you're looking for.

govenor

Kenfarmall

Member

Goose

Well-known Member

Similar threads