Looking for a carb kit for a Marvel Shebler TRX 36

Thewafflication · Dec 4, 2015

I have a 1945 Massey Harris 101 Sr. It has an F226 Continetal and I think is in need of a carb kit. I didn't run it for a year, and now it only runs at a very high rpm, regardless of throttle position and needs to be 3/4 choked. I'm getting good spark, and I replaced the spark plugs. I took apart the carburetor and needle valves have scratches in them. I can't find a carborator kit anywhere online for the TRX 36. Is there somewhere special I have to go, or is there a similar carburetor I could use parts from?

Dblair · Dec 4, 2015

have you called this site 800 number and told them what your looking for ?

Thewafflication · Dec 4, 2015

(quoted from post at 17:59:51 12/04/15) have you called this site 800 number and told them what your looking for ?

Yes, and they only have TSX carburetor numbers.

Den N Ms · Dec 4, 2015

Thewafflication,Are you sure it is a TRX-36 and not a TSX-36?

Thewafflication · Dec 4, 2015

(quoted from post at 19:04:59 12/04/15) Thewafflication,Are you sure it is a TRX-36 and not a TSX-36?

m sure it is a TRX-36

Steve@Advance · Dec 4, 2015

The symptoms you describe don't necessarily point to a carb problem.

The very high RPM could be a governor problem, or stuck throttle shaft. It could also be a major vacuum
leak. That would also explain the need for the choke.

The needle valve, I assume we're talking about the needle and seat where the fuel comes into the bowl? If
that were bad, the needle would fail to seal and the carb would flood, overflow fuel . Or the needle can
stick in the seat, resulting in no fuel in the bowl, no run at all.

Unless either of these problems are occurring, you may not absolutely need a carb kit, nice but not
necessary if you can clean it up and get it back together with what you have.

Check for vacuum leaks, check the governor linkage, you might get it running easier than you think.

Gene Dotson · Dec 4, 2015

My book calls for a TRX-30 carburetor for the 101 SR.

Gene

Thewafflication · Dec 4, 2015

Mine is a '45 model row crop which orignially came with steel wheels. I bought an original book the same age as my tractor, and like the carborator tag it calls for a TRX-36. [/img]

Thewafflication · Dec 4, 2015

Thewafflication · Dec 4, 2015

Den N Ms · Dec 4, 2015

Thewafflication , I Found a kit for you at Mikes Carburetor Parts
Part #: K5006 Price: $25.95

Kit was hard to find for sure.

Mikes Carburetor

Looking for a carb kit for a Marvel Shebler TRX 36

Thewafflication

New User

Dblair

Well-known Member

Thewafflication

New User

Den N Ms

Well-known Member

Thewafflication

New User

Steve@Advance

Well-known Member

Gene Dotson

Well-known Member

Thewafflication

New User

Thewafflication

New User

Thewafflication

New User

Den N Ms

Well-known Member

Similar threads