(800) 853-2651
SHOP NOW

IH 584 Power Steering Problem

M

Mark Gundrum

New User
I changed fluid and Hydraulic filter on my IH 584. I could get no power steering or hydraulics to work. I had put the screen in wrong on filter. I took apart and put it in correctly. Now 3 point and loader works great but I have no power steering. I thought maybe there was air trapped in lines so I cracked the rear hydraulic hose and still no power steering. Any idea where to start to fix? Power steering always worked well before.
 
On the bottom of the multiple control valve (MCV) There is a plug that needs to be removed then pull the valve out and reinstall it probably is stuck. If that doesn't work you will need to wrap some emery cloth around a drill bit and run it up in there with the drill motor to hone it just a bit then flush out and reinstall valve. Make sure the oil level is up also.
 
That can happen (as suggested below) because something in the MCV gets stuck, but it also happens pretty much every time there's a filter change on these tractors. Try turning the steering wheel lock-
to-lock about ten times with the engine above low idle and see if that gets fluid back into the steering circuit before pulling plugs out of the MCV.
 
You must log in or register to reply here.

Similar threads

B
John Deere 2940 power steering pump knocking
Replies
14
Views
351
Jim.ME
J
K
Massey Ferguson 20C steering issues
Replies
0
Views
73
KJB1053
K
A
Landini Vision 105 problem
Replies
3
Views
399
apollo1956
A
P
1750 Power Steering Leaks
Replies
8
Views
423
pcrh
P
D
Hydrostatic Power steering problem
Replies
4
Views
468
wore out
wore out
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top