the starter on my 300 utility will not engage the flywheel at times.
I replaced the tractor gear in the starter 2 years ago because the
original gear was chewed up from past slippage. the teeth on the new
gear were shorter but worked for a short time. it's now to the point
where it slips more often then engage. the flywheel shows a little
damage but I think it can be cleaned up. It is not the original
starter, it appears to be an after market product. I'm thinking it
may not be a good fit and I'm considering replacing it with a rebuilt
starter for my local ih dealer. anyone else experience this problem
with this model and can offer advise?
I replaced the tractor gear in the starter 2 years ago because the
original gear was chewed up from past slippage. the teeth on the new
gear were shorter but worked for a short time. it's now to the point
where it slips more often then engage. the flywheel shows a little
damage but I think it can be cleaned up. It is not the original
starter, it appears to be an after market product. I'm thinking it
may not be a good fit and I'm considering replacing it with a rebuilt
starter for my local ih dealer. anyone else experience this problem
with this model and can offer advise?
