A couple of weeks ago I was sorting out my shed and had to move some old engines I have stored for more than 20 years. One was a Fairbanks Morris Z-D. I thought I should do something with it. I got it started after cleaning up the points, cleaning out the gas tank and freeing the check ball in the gas line.
I had an old Craftsman tractor with Trans but little else. This tractor had a hard life as the engine, steering and front end were trash. I looked at Craigslist and found the parts I needed listed for $40.
Now I needed a way to transfer the power of a horizontal engine into the vertical orientation of the mower. I found a right angle gear and pulleys, bearings, belts and a ? inch keyed shaft.
I think it turned out pretty good for a weekend project.
<a href="http://s41.photobucket.com/user/soder33/media/mower/IMG_0003_zpsgufy14vj.jpg.html" target="_blank">
</a>
<a href="http://s41.photobucket.com/user/soder33/media/mower/IMG_0005_zps79onuc9g.jpg.html" target="_blank">
</a>
<a href="http://s41.photobucket.com/user/soder33/media/mower/IMG_0008_zpsujeytnyx.jpg.html" target="_blank">
</a>
<a href="http://s41.photobucket.com/user/soder33/media/mower/IMG_0013_zpshbhnxvb3.jpg.html" target="_blank">
</a>
I had an old Craftsman tractor with Trans but little else. This tractor had a hard life as the engine, steering and front end were trash. I looked at Craigslist and found the parts I needed listed for $40.
Now I needed a way to transfer the power of a horizontal engine into the vertical orientation of the mower. I found a right angle gear and pulleys, bearings, belts and a ? inch keyed shaft.
I think it turned out pretty good for a weekend project.
<a href="http://s41.photobucket.com/user/soder33/media/mower/IMG_0003_zpsgufy14vj.jpg.html" target="_blank">
<a href="http://s41.photobucket.com/user/soder33/media/mower/IMG_0005_zps79onuc9g.jpg.html" target="_blank">
<a href="http://s41.photobucket.com/user/soder33/media/mower/IMG_0008_zpsujeytnyx.jpg.html" target="_blank">
<a href="http://s41.photobucket.com/user/soder33/media/mower/IMG_0013_zpshbhnxvb3.jpg.html" target="_blank">