ford tractor mounting

Bobford · Sep 14, 2015

I have a ford 4000 1964 i was trying to find out what the mounting holes are for (where the serial number is and the same on the other side two holes)

Tiger Joe · Sep 14, 2015

I always thought they are mounting holes for front loader brackets

Bobford · Sep 14, 2015

I was hoping it was something like that , I want to put a belly mount snow plow on it and need some mounting points

Billy NY · Sep 14, 2015

Had a '64 with a hydraulic lift snow plow, factory attachment, and it was a full frame to the rear axle, like most, if not all the loaders of that era.

stevob671 · Sep 14, 2015

Yes they are loader mount points. Go ahead with your project.

SparepartsTN · Sep 14, 2015

The holes on the left side are used for mounting the Ford 711 loader, don't know what else could be mounted.

Billy NY · Sep 14, 2015

Well except the 1 arm LOL !

Bobford · Sep 15, 2015

Thanks for all the info.

NoNewParts · Sep 15, 2015

(quoted from post at 11:22:42 09/14/15) I was hoping it was something like that , I want to put a belly mount snow plow on it and need some mounting points

it'll be fine
my homebrew snowplow, my angle iron braces mount there.
add another brace or two back to the rear axle from the plow frame and it'll plow anything.
I just used one, in addition to the side braces, all the way back to the swinging drawbar hitch frame, works good.

ford tractor mounting

Bobford

New User

Tiger Joe

Member

Bobford

New User

Billy NY

Well-known Member

stevob671

Member

SparepartsTN

Member

Billy NY

Well-known Member

Bobford

New User

NoNewParts

Member

Similar threads