7410 deere

Cartman · Aug 12, 2015

I looked at the yoke on the input shaft on transmission side on that 7410 deere looks like it is wore out a little any one know how much that yoke cost.

donjr · Aug 12, 2015

Yoke or cross????

Sparktrician · Aug 12, 2015

The splined one? One for a 6400 ,was like
365 if I remember correctly

Brady V · Aug 12, 2015

the latest version ordered with the boot will run you about $250.

tim s · Aug 12, 2015

I would change the crosses out too while it was out...

Tx Jim · Aug 13, 2015

If I'm looking at correct shaft there;s a serial number break at sn 30,000
early model
R110087 Yoke With Shaft - YOKE WITH SHAFT, MODULE INPUT ADD 189.46 USD
later moddel
RE228161 Universal Joint Yoke - UNIVERSAL JOINT YOKE, WITH PLUG ADD 187.15 USD

johnwayne360 · Aug 13, 2015

How many hours? Deere recommends changing the balancer(? I forgot the proper term for it) at 5k hours. Make sure its done. I bought a tractor with 6k hours on it, no one told me it needed attention(I bought it from a dealer) and it cost me 7k when it went.

Cartman · Aug 22, 2015

(reply to post at 04:06:41 08/13/15)

bought the 7410 even though it needed some work will do it my self because I don't like their mechanic. Sn on it is RW7410H011912 on the transmission out put shaft what yoke part# will I need 110087, 228161 or R100461 sorry for the dumb question but I don't have a manual or parts list for it. It's on the shaft that runs from the transmission to the flywheel. The yoke I need is on the transmission side thank you for any help.

Brady V · Aug 22, 2015

Tractors under SN 30000 show it uses R110087.

JD has it's parts catalogs online at JDparts.com, I recommend you check the parts numbers yourself as I have mistakenly ordered incorrect parts for myself.

Tx Jim · Aug 23, 2015

Ditto what Brady V stated tractors under SN 30000 show it uses R110087.

Cartman · Aug 23, 2015

(reply to post at 03:30:36 08/23/15)

my 7410 is a hi crop does that make a differance. I looked on jd parts.deere and did not have any luck. John deere ordered part# R100461 witch might be the wrong part.

Tx Jim · Aug 23, 2015

R100461(parts key 5) is yoke for pinion shaft in differential not input shaft on trans. Which trans does your tractor have PQ or SP???

7410 deere

Cartman

Member

donjr

Well-known Member

Sparktrician

Member

Brady V

Member

tim s

Well-known Member

Tx Jim

Well-known Member

johnwayne360

Member

Cartman

Member

Brady V

Member

Tx Jim

Well-known Member

Cartman

Member

Tx Jim

Well-known Member

Similar threads