Massey 231 hydraulic problems

Baconbits141 · Jun 23, 2015

the lift arms WITH a box blade attachment will not float it either wants to be all the way up or all the way down. no matter what position the handles are in. I have replaced all gaskets and seals and O-rings under the top and on the piston. I am stumped if anyone has any ideas or experience with this problem advice would be appreciated.

37chief · Jun 23, 2015

Mine does the same thing. I believe there is a valve inside the transmission. I am told it is very hard to get at. I use mine for mowing, and let the mower hang on the lift arms. I raise mine for turning only. Stan

Dean · Jun 23, 2015

Are you SURE that you have a problem?

Do you know how to operate the draft and position controls?

Do you have an owner's manual?

Dean

Baconbits141 · Jun 23, 2015

yes, there is a problem.

if you hit the throttle no matter what it wants to lift up.

it will not float in the middle.

it wants to be all the way up or all the way down but still if you hit the throttle it will come all the way up.

I work on tractors for a living for years now, and have never had this problem I am sure it is something stupid simple.

Massey 231 hydraulic problems

Baconbits141

New User

37chief

Well-known Member

Dean

Well-known Member

Baconbits141

New User

Similar threads