hydraulic motor question

farmer boy

Well-known Member
Wondering what size of motor to put on a 6" x 20' auger. Doesn't have to be able to run at full capacity. Just want to have enough power that I can move a decent amount. I was wondering about what the one in the link would be like. Rpm seems close but I wouldn't be able to run 16gpm for the most part. What would 11gpm do to this pump. I would also like to be able to occasionally move some fertilizer.
7.8cu in hydraulic pump
 

325 or so rpm at 11gpm.
Approx 11HP at 2000psi and 11gpm.
Torque would be approx 175lb ft.
Should be capable of running just about anything through the auger.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top