case vai shifter

caseydog · Apr 5, 2015

My 1951 case VAI keeps jumping out of reverse. Is this a problem with the reverse latch on the shifter or is there another reason?

Adirondack case guy · Apr 6, 2015

You may have a bent reverse shifting fork. The bushings on the counter shaft for reverse could also be bad. It's pretty easy to remove the cover holding the shifting assy and take a look at things inside the tranny. Scroll down to Case forum where all us Case guys usually hang out. Lots of Case brainpower there.
Loren, the Acg.

caseydog · Apr 6, 2015

The reverse fork does not look bent. I tried another shifter assembly with the same result, however I found the spring on the reverse latch was in pieces and therefore I do not think it worked at all. I am not sure what to check for in the bushings that you talk about.
Thanks for the reply

case vai shifter

caseydog

Member

Adirondack case guy

Well-known Member

caseydog

Member

Similar threads