A couple needed for a Marvel Schebler TSX carb

(A couple of PARTS needed, I cant correct the title.)
I posted on the Oliver page, but probably ought to bring it here, as this carb was used on many tractors. The original thread is here,
http://forums.yesterdaystractors.com/viewtopic.php?p=7445404#7445404

The tractor in question seems to be made of parts from many years. The carb was missing, and I found the carb appropriate to the engine, rusty and in a quarry.

I am missing the idle mix needle and spring, the choke flap spring.
The spring around the choke shaft has broken, but is not that important with a properly adjusted cable, and may be hard to replace.
Does anyone have a TSX parts carb and is willing to sell and mail me to these small parts?
 
Now kts worse. Both the MS and the Zenith have emulsion tubes that broke off. The MS is goinb to be tough as the threads are at the bottom. The easiest solution may be to go with the Zenith at this point.
Doesn anyone know of a source for an emulsion tube, or is it time for some lathe work?
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top