1970 case 1000 dozer

graym · Feb 4, 2015

My 1000 case go in gear and moves a couple of feet and stops let sit awile and moves again anu ideas?
Thanks
Mike

TGP · Feb 4, 2015

You showing any pressures on your converter gauge?
Check the Trans. oil?
Change Trans. filter ?
Tom

george md · Feb 4, 2015

Mike,

Most likely a 60 rather than 70's machine.
Is it a C or D machine ? C has 2 filters ,
suction filter is under the floor board and
pressure is under the seat. suction is 100 mesh
marvel screen (washable), pressure is edge
wound paper filter ( very delicate but washable).
D model has 2 filters suction is in the frame
rail on left side of engine(same filter as C but
mounted different. pressure is canister under
seat, Replaceable element.

If suction filter has aluminum ,look for the
forward bushing inside the torque converter to
be bad allowing the halves of the converter to
rub together.

Send me an email with a phone # and I'll call
you.

george

1970 case 1000 dozer

graym

New User

TGP

Member

george md

Well-known Member

Similar threads