macattack66
Member
Case 2294 won't move I tracked it down to the
circuit board the number 1 slot the purple wire
was burnt and solder melted off. I bought a new
one and tractor still won't move I checked the
fuses and the trans fuse has no fire it has a
purple wire with a yellow stripe and the other
wire is purple at fuse location the purple yellow
strip wire goes to the relay behind dash the relay
works but that wire doesn't energize I jumped a
hot wire from a fuse block that only comes on when
key is on to the original fuse location and now it
works and 2 solenoids are magnatized can I leave
it this way and run a inline fuse to? I don't have
a wire schematic so I can track the wires but I
know the purple wire also goes to key switch can
switch be the problem? It' hard to put all this in
words I hope someone can make sense of what I
wrote. Thanks for any help
circuit board the number 1 slot the purple wire
was burnt and solder melted off. I bought a new
one and tractor still won't move I checked the
fuses and the trans fuse has no fire it has a
purple wire with a yellow stripe and the other
wire is purple at fuse location the purple yellow
strip wire goes to the relay behind dash the relay
works but that wire doesn't energize I jumped a
hot wire from a fuse block that only comes on when
key is on to the original fuse location and now it
works and 2 solenoids are magnatized can I leave
it this way and run a inline fuse to? I don't have
a wire schematic so I can track the wires but I
know the purple wire also goes to key switch can
switch be the problem? It' hard to put all this in
words I hope someone can make sense of what I
wrote. Thanks for any help