(800) 853-2651
SHOP NOW

706 question

T

True Son

Member
I have what I believe to be a 1965 706 gas. Cast into the block
is 291..... I would have thought this tractor would have been a
263. Is it possible that a 1965 706 could have come from the
factory wiyh a 291 engine? Sorry, don't have serial no. handy
as tractor is 110 miles away. Thanks, Cmore
 
On a smooth piece just below the dist will be 263, or 291, it won't be a cast #, but a stamped one, 706's with the 291 will have longer frames.
 
Yes, it is entirely possible according to the tractor data site for that tractor. Just Google, (tractor data international harvester) Click on 706 and full engine details.
 
It may be a C291 but it isn't factory in a 1965 tractor. The C291 wasn't put in a production tractor until late 1966.

The tractor probably has a replacement block in it, if it's really a C291, and the stamped numbers you found are not part of the block serial number.
 
The serial number breaks for the change in engine from C263 to C291 occurred at 37236/37237 for Farmall models and 5273/5274 for International models.
 
You must log in or register to reply here.

Similar threads

RedMF40
Moving a dead loader tractor
2
Replies
23
Views
1K
Bruce from Can.
Bruce from Can.
3
fork lift question
Replies
14
Views
913
Dennis P
Dennis P
F
Tractor Stability Question
Replies
15
Views
956
FinallyFarming
F
G
Almost too embarassed to post again TSX 706
Replies
16
Views
1K
JMOR
J
JMcBrayer
1962 Farmall 140 12v or 6v?
2
Replies
30
Views
1K
37chief
3
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top