Dual Loader Question

BradyW · Jan 15, 2015

Even Gentleman, Wondering if the hydraulic cylinders on a 3100 Dual loader can be changed out with ones on a 345 Dual loader. My 345 is leaking and the rams are a little beat up, I have a line on some off a 3100, but they are to far to go take measurements. Can't just change loaders because mine is narrowed up to fit my tractor. Thanks

Tx Jim · Jan 16, 2015

Interchanging hyd cylinders from one loader to another loader will be determined by length of stroke in both closed & open position and pin sizes.

Bob · Jan 16, 2015

I have a 3100, and I would GUESS the cylinders are longer than on a 345, but if the link below works, you can get the dimensions and check it out vs. your 345.
3100

BradyW · Jan 16, 2015

Thanks Bob, if you could give me a Retracted measurement on the cylinder (pin to pin centers) That would be helpful and pin size. Looks like the seal kits are the same. Thanks Brady

Bob · Jan 17, 2015

(quoted from post at 09:41:19 01/16/15) Thanks Bob, if you could give me a Retracted measurement on the cylinder (pin to pin centers) That would be helpful and pin size. Looks like the seal kits are the same. Thanks Brady

There's a "retracted" dimension in the parts link I posted.

I will post back with the pin diameters.

Dual Loader Question

BradyW

Member

Tx Jim

Well-known Member

Bob

Well-known Member

BradyW

Member

Bob

Well-known Member

Similar threads