Shop cleaned and manuals found

David G · Dec 7, 2014

I got the shooting range cleaned out in shop today, and here is a list of manuals I found. Send me an email and I will mail them to you, will plan to throw them out next weekend.

JD No8 and No8W mower operators manual
Ford Tractor 2N 8N 9N IT shop manual copy
Case IH model 46 baler operators manual
Oliver and Cockshutt 1750-1950 IT shop manual

I am happy to get shooting range opened up, it has been filled up for a year.

Fordfarmer · Dec 7, 2014

What is the tractor in front of the boat? 5200?

David G · Dec 7, 2014

Bryce Frazier has spoken for the Ford 8N manuals.

David G · Dec 7, 2014

It is a 6610 that has 5000 series rear wheels and tires, I will put the original series back on when I replace tires year after next.

The Farmall H is due for rear tires next year.

David G · Dec 7, 2014

JD Seller has spoken for the Oliver manual.

mjsnodgrass · Dec 7, 2014

david

please tell me more about the shop mezzanine you built. I'm looking to build the same but not sure of post spacing, joist spacing, beams etc. I'm looking to build mine 12 x 30 or so. thanks david

David G · Dec 7, 2014

I have posts on 15' centers with dual 10" LAM beams, joist hangers and TGI joists.

kansas45 · Dec 7, 2014

Hey David G. What do you shoot in your shed and at what range?

David G · Dec 7, 2014

Bows, I can shoot 18 yards without opening door. I got a 3x5x2 bale made of compressed grocery bags for target. I am shooting at about 45 pounds until I get shoulder built back up from surgery winter before last. I just got to busy last winter to shoot.

kansas45 · Dec 7, 2014

There is no wind, the climate is good and you are building shoulder strength.
Life is good!

David G · Dec 7, 2014

I am not planning on any equipment updates this winter, just cleaning up shop, shooting and spend time with family.

55 50 Ron · Dec 8, 2014

David,

It would be interesting to see an outside picture of your shed.

How high from floor to ceiling?

Maybe you posted that before. Is so, sorry I missed it.

I've got my eye on some local Masseys. A 33, two 44 Specials and a 444 diesel. Any one would be a nice addition to the MN AG Interpretive Center where I serve on Bd of Directors.

Ron

David G · Dec 8, 2014

I will take and post pictures, but am away for work this week.

The shop is 40x60x16 with full foundation and heated slab. I will add a 40x30x10 addition on the end away from the door sometime for unheated storage. It is built into a hill, so the deck is actually ground level and 16' on the other side with a 20x60x10 lean too.

Shop cleaned and manuals found

David G

Well-known Member

Fordfarmer

Well-known Member

David G

Well-known Member

David G

Well-known Member

David G

Well-known Member

mjsnodgrass

Member

David G

Well-known Member

kansas45

Member

David G

Well-known Member

kansas45

Member

David G

Well-known Member

55 50 Ron

Well-known Member

David G

Well-known Member

Similar threads