won't shift from low to high range.70 international 454 gas

darrell williams · Aug 7, 2014

had the clutch replaced and now won"t shift from low range to high range.worked fine til changed clutch.70 model international 454.

495man · Aug 8, 2014

Should not be related, range transmission is after the speed trans and after the clutch.

Does the speed lever shift fine?

darrell williams · Aug 8, 2014

shifts through low speeds but wont go into high position.

merlynr · Aug 8, 2014

(quoted from post at 10:54:45 08/08/14) shifts through low speeds but wont go into high position.

The shift linkage seems over engineered or something on my 454. You have that panel off?

fixerupper · Aug 8, 2014

It's probably not this simple but maybe all you need is a shot of oil in the linkage. Had a similar problem with the 1086 last winter only it sometimes wouldn't go into park. I had all kinds of expensive ideas in my mind on what the problem was but then on a whim I shot oil on the roller at the bottom of the shift levers and it instantly went into park better then it had for several years. A 1086 is a little different but similar. It's a darned good feeling when something simple like that works out OK. Jim

darrell williams · Aug 8, 2014

have not removed anything yet.just doing some research first.guess i might need to get a book.had the clutch installed by a local tractor shop and they closed up shop.did'nt check high gear for a few months!

won't shift from low to high range.70 international 454 gas

darrell williams

New User

495man

Well-known Member

darrell williams

New User

merlynr

Member

fixerupper

Well-known Member

darrell williams

New User

Similar threads