1655oliver headbolt torque sequnce

Anonymous-0 · Aug 6, 2014

can anyone help me with this torque sequence for this oliver

Goose · Aug 6, 2014

Can't help you with this particular application, but the rule of thumb is to start with the innermost bolts and work outward.

JMS/.MN · Aug 6, 2014

Generic pattern is start in the middle, working outward (as said) but crossing over to the other side after each bolt. Also about 3 sequences of that to get to final tightening. ie, don"t torque to final at once.

ejr-IA · Aug 6, 2014

don't over tighten the hollow oil supply head bolt it is less than the rest.

greg oliver · Aug 6, 2014

My manual shows starting in middle of head and working out on both gas and diesel like everyone said on middle 1-6 cap screws on direct injection diesel head tighten to 147- 150 ft. lbs. cap screws 7-14 tighten to 129-130 ft. lbs. that includes oil screw. If this is gas engine tighten oil screw to 96-100 ft. lbs. and all others to 112-117 ft. of torque. Hope this helps, Greg

1655oliver headbolt torque sequnce

Anonymous-0

Well-known Member

Goose

Well-known Member

JMS/.MN

Well-known Member

ejr-IA

Member

greg oliver

Well-known Member

Similar threads