Susan that is going to be tough to find. those steel tanks rust out bad. They make a compound that you can reline the insides that is suppose to work well, but I have never used it. I was told motorcycle shops have it. good luck!
 
I have a LGT100 and altho I"m not sure...it would seem to be a part of the Kohler K241 engine rather than a Ford item. Couple of thoughts---go to the Kohler website and see if they show it---or--call the nearest New Holland dealer and see if they stock it. Of course you can as the others have suggested re-line it. Hope this helps.
 
check this out, if not to bad. I have soldered tanks with an old (NO FLAME) soldering iron. ( heated up away from all fumes in tank.) and then used red-kote. worked for a long time.

Use caution and read all you can before you decide what to do. joe
Untitled URL Link
 
If it's a Kohler tank (if it bolts to the motor
and/or you don't have a fuel pump itg probably is)
Go to a Kohler dealer or look on E-Bay. If you're
having troubles finding one on E-Bay look for Cub
Cadet or Wheel Horse parts as they used a lot of
Kohler engines. I noticed you handle...My Mom was a
Winslow, descended from Kenelm Winslow.
 
Is that Ford 100 the same basic tractor as a Jacobsen Chief 1000? If it is, the tank is a Jacobsen part and is different from the Kohler tanks I am familiar with. Check Ebay.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top