What glue for clutch / brake lining

Ken Macfarlane · Jul 2, 2014

Lost the lining on one of my needle brake pads on the baler and parts are at least 4 days out. What would you use to glue the lining back on?

Ken Macfarlane · Jul 2, 2014

Seems like good old jb weld will do the job for this low temp application.

Mike M · Jul 2, 2014

If you do use JB make sure you sandblast the surface it needs to stick to. Best way to clean it up and assure it to stick. I did a clutch pulley brake pad without sandblasting just cleaning and it did not stick. So BTDT.

Mike Aylward · Jul 2, 2014

I've done this on clutch facings and used 3M Weatherstrip glue. It's still working after several years. Mike

VaTom · Jul 2, 2014

I had a wet (clutch) brake glue fail. I used PL Premium construction adhesive. Still working fine when I sold the tractor. PL Premium isn't very fussy about what it sticks to, just needs to be sound. Don't get any on you, very difficult to remove.

What glue for clutch / brake lining

Ken Macfarlane

Well-known Member

Ken Macfarlane

Well-known Member

Mike M

Well-known Member

Mike Aylward

Well-known Member

VaTom

Well-known Member

Similar threads