massy ferguson 35

sara molyneaux · Jun 9, 2014

how do I keep my bush hog from rising up when I need it to stay
down ?

Spudm · Jun 9, 2014

Lower the draft control.

samn40 · Jun 9, 2014

Use you position lever and do not push it all the way down into response control. just push it down to the lower position should suffice.
............Sam

37chief · Jun 9, 2014

Here is what I found. I have a MF with the same problem. I finally just let it all the way down, and use the leveling boxes for setting the height. I only raise it for turning. I have a John Deere I can set the height with the lift lever it stays where I set it. Doesn't move a bit. I think the MF have a valve internally that needs replacing. Maybe someone smarter than my self can add a little to this. Stan

aFORDable · Jun 9, 2014

I'll second what spudm said. That's the shorter of the two levers and it sounds like you have it raised to engage. Lower it all the way.

Bret4207 · Jun 10, 2014

An operators manual will explain how the settings on the hydraulic control levers work better than the brief responses you'll get here.

massy ferguson 35

sara molyneaux

New User

Spudm

Member

samn40

Well-known Member

37chief

Well-known Member

aFORDable

Member

Bret4207

Well-known Member

Similar threads