PTO Hydraulic Pump Mounting

Rkh · May 6, 2014

I have a Mf-65 and was wondering what holds these pumps in place(http://www.ebay.com/itm/Prince-Manufacturing-Hydraulic-PTO-Pump-HC-PTO-3A-NEW-/360276501153?pt=Pneumatic_Hydraulic_Valves_Parts&hash=item53e22722a1)?

Tx Jim · May 6, 2014

A strap of metal bolted to the pump that extends down past drawbar to keep pump from spinning. Some straps also have a chain to attach to drawbar support .

ohiojim · May 6, 2014

what jim said....

DeltaRed · May 6, 2014

What they said...Just push it onto the shaft,secure the chain.Done.

big jt · May 6, 2014

What the other posters said is the standard method.

If you are gonna use the pump hard and especially if it will be a permanent fixture I would suggest one of these.

They are a bit more of a pain to mount and take off but takes alot of the strain off the PTO shaft.

jt
pump doctor

PTO Hydraulic Pump Mounting

Rkh

Member

Tx Jim

Well-known Member

ohiojim

Well-known Member

DeltaRed

Well-known Member

big jt

Well-known Member

Similar threads