farmall h radiator

redman06 · May 3, 2014

Just got my h restored and drove it down the road and the radiator shifts side to side and causes the fan to hit the guard. Any one ever experience that?

David G · May 3, 2014

Did you put rubber pads under the radiator and tie them down?

Or the rail bolts are loose.

LenND · May 3, 2014

The bottom two bolts on the radiator should hold it solid. The two bolts have a spring to keep everything snug. Did you put the pads and springs in?

John M · May 3, 2014

Is the radiator moving, or just the shroud? Is it an IH original, or aftermarket radiator?

redman06 · May 3, 2014

(quoted from post at 18:26:40 05/03/14) Is the radiator moving, or just the shroud? Is it an IH original, or aftermarket radiator?

Its an after market and I mad rubber pads. The bolts are tight. The whole radiator will slide.

redman06 · May 3, 2014

(quoted from post at 18:26:40 05/03/14) Is the radiator moving, or just the shroud? Is it an IH original, or aftermarket radiator?

Its an after market and I mad rubber pads. The bolts are tight. The whole radiator will slide.

John M · May 4, 2014

Most aftermarket radiators don't fit the way they should. If I had to take a guess, Id say the studs aren't long enough on the nut end, and you don't really have it tight enough to hold it down, OR your pads are thick enough. I really think the latter is the problem.. It should move much to start with with the grill on right, which can be hard with the aftermarkets.

LenND · May 4, 2014

I just took my H radiator off last week. If the bolts are tight that radiator can't move.

farmall h radiator

redman06

New User

David G

Well-known Member

LenND

Well-known Member

John M

Well-known Member

redman06

New User

redman06

New User

John M

Well-known Member

LenND

Well-known Member

Similar threads