John Deere 2640 engine turning tool

therd3 · Apr 22, 2014

I have a JD 2640 that the throttle lever broke off the injector pump so I need to remove the pump. I need to set the engine at TDC using the engine turning tool. Any one know what number fits a 2640. I"ve seen a JDE-1-1 AND JDE-3 and a few more but none had my tractor listed. :?:
thanks

George

JD 2640

MASSEY FERGUSON TO-35

CRAFTSMAN YT3000

Tx Jim · Apr 23, 2014

Using care one can replace throttle shaft while inj pump remains on engine.

showcrop · Apr 23, 2014

It doesn't have a nut on the front of the crankshaft?

therd3 · Apr 23, 2014

The hydrolic pump is on the end of the crankshaft.

therd3 · Apr 23, 2014

Its a hollow tube with a shaft inside a tube and I have seen a video of the guts and it complicated and its not in an easy place to get to(loaders in the way). Plus I have no Idea what I'm doing. I will leave it to someone who knows what there doing. And even finding the part is no easy task. I found someone that will do it for one hour labor plus parts.
Untitled URL Link

Tx Jim · Apr 23, 2014

CORRECTION: After viewing parts schematic I made an inaccurate statement. I agree in pump needs to be removed from engine to R&R throttle shaft. USdiesel will probably have the part.

John Deere 2640 engine turning tool

therd3

New User

Tx Jim

Well-known Member

showcrop

Well-known Member

therd3

New User

therd3

New User

Tx Jim

Well-known Member

Similar threads