Oliver 77 clutch

Anonymous-0

Well-known Member
Oliver 77 clutch replacement.1950 Row Crop. I have the belt pulley housing out. Will the bell housing come right out with the engine bolted in? It looks like the rear of the engine might have to be raised so the bottom of the bell housing will clear the frame. Also I want to install the newer high leverage easy push clutch pedal. Is all that is necessary is change the pedal itself? Where can I get one? Thanks, great resource sight!
 
Never changed a pedal,but if you have the belt pulley gear box out,have the PTO shaft pulled out and have the coupler off the driveshaft,you should be able to just slide the bell housing back and lift it out.
 
Yes The petal will go right on. Are you going with a new pressure plate? If not you may need to adjust the height of the release levers. Find that petal off or any 77, 88 or Super series at a salvage yard. Then adjust th free travel.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top