Ford 801 Powermaster

Jordan baker · Mar 20, 2014

Hello everyone. I have a issue and needing help locating a
part or even a part number. We have a 4cyl. diesel 801 ford
tractor. The fuel injector return line that runs from the engine
block to the T fitting on the bottom of the tank is broke. I have
found the return line that goes from the injection pump to the
tank but can't find anything on the one from engine block to
tank. Thanks everyone for the help!

aFORDable · Mar 20, 2014

Don't know where you are located Jordan but the small Ford experts around here is Kough Equipment. You can find them on line and call and talk to them. They ship country wide.

LarrySTN · Mar 20, 2014

you can make that line up from brake line or copper tubing, go to your local napa or other auto parts store.

Anonymous-0 · Mar 20, 2014

Cut it, and clamp a hose to join over the ends, it's not real high pressure.

BillOHIO · Mar 20, 2014

Jordan, Does look like there is one still available from Dealer B9NN6A035B. High priced and only fits certain models depending on what fuel tank is used. Earlier part numbers NLA. You would have to check with Dealer to see if your tractor takes this line that is available. Due to price I would consider what other guys suggest about making one up.

You can look this up by going to Messick's website and chose the New Holland parts list.

Bill

Bob · Mar 20, 2014

Here's a link to the on-line parts lookup showing the part numbers. Figure out what you need and pop the number into GOOGLE and see if there's any out there!
Parts page

jerrybigrig · Mar 21, 2014

Find a hydrolic hose repair shop they make steel bent lines ...

in-too-deep · Mar 21, 2014

List price is $209 and I can have it from NH tuesday morning. Call 218-938-4131 and ask for "the new Chris"

Ford 801 Powermaster

Jordan baker

New User

aFORDable

Member

LarrySTN

Member

Anonymous-0

Well-known Member

BillOHIO

Member

Bob

Well-known Member

jerrybigrig

Member

in-too-deep

Well-known Member

Similar threads