need help on a couple oil seal numbers

Wild Bill · Mar 13, 2014

Help! Looking for two oil seals, need a part number from the bore and shaft dimensions.

first seal- 2 5/8 inch bore, 2 inch shaft, 5/16 inch thick

second seal- 1 3/4 inch bore, 1 1/4 inch shaft, 5/16 inch thick

Local parts guys look at me like I have a third eyeball. Online seal catalogs don"t work on my phone. No numbers on old seals, can you help???

IrvIA · Mar 13, 2014

McMaster Carr 5154T41 and 5154T45. The big one is 2.623 on the O.D. if you can live with that. It's .002 undersize.
Any decent bearing house should be able to get you what you need. Chicago Rawhide and National both have books that you can order by size.
You need a new parts guy. :^)

IrvIA · Mar 13, 2014

I should have also added that the small seal is only a 1/4" thick, but I think it would work. What is your application?? Some types of seals work better than others, depending on where they are used.

IrvIA · Mar 13, 2014

I looked up SKF , 1.25 x 1.75 x .313 564216
2.00x 2.625 x .313 19760, 19762,
19777, or 19782 depending on lip material and configuration.
Irv

LarrySTN · Mar 13, 2014

1st seal = SKF or CR 534836
2nd seal = SKF or CR 564216

Wild Bill · Mar 13, 2014

Thank you both very much!

They are seals in my old post hole auger

gene bender · Mar 14, 2014

No problem just find anothere parts man your new seals mite not be a thick as the old ones but O.D. and I.D. will be the same.

need help on a couple oil seal numbers

Wild Bill

Member

IrvIA

Member

IrvIA

Member

IrvIA

Member

LarrySTN

Member

Wild Bill

Member

gene bender

Well-known Member

Similar threads