JD 720 stuff.

Anonymous-0

Well-known Member
I was thinking that i might have to take this
Loader off,
the arms are too close to the the seat, and spot light's and flywheel cover.
pics are on the JD and tractor photo file.
 
I can't tell from that picture ?

But those loaders were made to fit those tractors,but you do have to have the right brackets and a spacer for the side brace mount on the 70,720,730 models. The parts book for that loader may show good pictures of them.
May even be able to download it at JD website.
 
Hi Mike,
yea i think someomne jury rigged this one
Ill take some more pics of the back of the loader ok Mine and you can see it there too. ok.
the thing is too close to the tractor side's.
Im thinking of taking it off and selling it to someone if they need a loader for a 70, 720, 730.
id just put a blade on the back of the three point.
make it simple.
 
There's not going to be much extra room at the side of those and getting on and off with a 3pt. on the back is tuff too.
Plus you need 2 right arms. 1 for the clutch and 1 for the loader valve.
 
Hi Mike
im thinking about letting the loader go.
and then just get the three point or even two point.
I was gonna ask about 200,00 or best offer.
I figure that's fair. for a vintage loader like the 45W. at least i could get up on the back of the tractor. and function. better than with it as it is now. if you know of anyone that wants a loader that this fits on?
let me know ok?
Kirk.
 
That's more then fair. Maybe a bit low ? The 45W is alot harder to find then the 45

Put an ad on this site over in the classifieds or photo ads.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top