(800) 853-2651
SHOP NOW

paulson loader for either my 8N or jubilee

E

ejensen

Well-known Member
I would want a front mounted pump and hydraulic bucket
One way up on the lift arms is ok with me
Only thing I can find is s number to call in Minnesota. Sunday here in the state of Arizona.Is Paulson still in business. I would use a 700 lb counter weight in the point to keep the back end on the ground and help with steering
Any current information on the cost of the loader I want to set up? SSB in new York sells one for $4000 plus $500 shipping.
our website. einarjensen.com
 
You can usually find the old Dearborn loaders for around $300 or less with the front mount pump.For $ 4500 I would buy a newer tractor with power steering and a loader already on it.

JMO

Vito
 
Paulson is still in business- located in Rogers, MN. Just NW of Metro. I bought a frame with lift cyl on an auction for $65 some years ago, fits an 8N. Trip bucket models usually go either side of $300 around here. Full hyd with front pumps go for more.
 
Thank you for the information.I sure like the prices you mentioned for the used
Paulson loaders.
 
There are thousands around here- very popular since the 1950s, mfgrd close by, many different color dealers sold them. Trip bucket was big improvement over a fork. Many put on AC WD tractors, H&M Farmall. I have one on my reversed WD. Excellent traction.
 
JMS,
I am in Arizona for another week
I live in the state of Washington.Have been checking Craigslist for a Paulson loader in several areas of the state.Found one for $1500. Came off a jubilee.Front mounted pump, hydraulics to the bucket and one way hydraulics to the frame. The wagners are around but I like the design of the paulson
 
Had a loader on my 8N for awhile. It was REAL handy in close quarters, but not able to lift a LOT of weight. It ran on the front pump. I still used the three point. Got a bigger tractor and didn't need two loaders. Mine was a Dearborn loader - can still find them for under $200.
 
Dachshund,
the Wagner loaders make it hard to get on the tractor.Is the Dearborn like the Wagner?
 
Dachshund,
Since our last communications I located a Paulson, has front pump, hydraulic cylinders for bucket. It came off a jubilee so I bought it
 
You must log in or register to reply here.

Similar threads

E
loader for my ford jubilee
Replies
4
Views
659
ejensen
E
M
front loader for 1964 Ford 2000
Replies
3
Views
707
4500GUY
4
T
Fatal Farm Accident - underage worker
2 3
Replies
41
Views
5K
Pair-a-dice farm
P
E
paulson loader , fit both 8N @ Jubilee
Replies
11
Views
903
old
O
E
paulson loader for 8n @ ford jubilee
Replies
2
Views
665
ejensen
E
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top