Aluminum signs on stuccoed walls

carl reitnauer · Oct 8, 2013

I need to put a series of those thin aluminum signs on a stuccoed conrete wall.......What adhesive will hold them on but be removeable without staining the new paint?

IH2444 · Oct 8, 2013

I think you will have trouble finding an adhesive that fits your requirements.
I think and backer board and mechanical fasteners will be best.

Also is this to be out in the weather or inside?

And the different expansion rates of aluminum and stucco will cause issues I would think.

dr sportster · Oct 8, 2013

I am an amatuer sign painter. I have done this on a warehouse sign by putting clear silicone blobs in each corner of the sign ,then duct tape it in place. Then I told the owner to remove the duct tape the next day. Some time later they moved but I did not return to veiw the silicone blobs as the sign was removed and now sits in a new office. This sign was next to an entrance door and no ladder was required for this. [ Note that stucco is often styrofoam panels underneath so blue anchors won't work in that type.

FBH44 · Oct 8, 2013

Not sure this is tractor related, but there is a paint forum on this site. MIght go there.

Aluminum signs on stuccoed walls

carl reitnauer

Member

IH2444

Well-known Member

dr sportster

Well-known Member

FBH44

Well-known Member

Similar threads