Kubota B8200 hyds problems

old · Sep 29, 2013

Changed all the fluid in this thing today. The transmission/hyds where a cream color. The hyds did not seem to work well before I changed the fluid and not much if any better now. 3 point might work as the same with the loader.
So #1 is there a filter in the hyd system some place???
#2 how many gal. of fluid does it take and will over filling it hurt any thing??
Thanks

ramtuff · Sep 29, 2013

Don't know about the 8200 but my 7100 has screen on the suction tube where it goes into the transmission.

Tx Jim · Sep 29, 2013

According to Kubota parts there's a screen that lies across bottom of trans housing even with where suction line attaches. PN 67800-37120

ramtuff · Sep 29, 2013

You can probably take the screen out and wash it out.Is what I did.

Dean · Sep 29, 2013

There is a suction strainer that must be cleaned periodically but rarely is. If it has been neglected too long, the pump is likely worn out.

You will likely need new O rings if you remove it.

Like any lubrication system, it should not be overfilled.

Hydrostats have a filter beneath the cover between the operators knees. Use a Kubota filter.

Dean

old · Sep 29, 2013

This one is a non-hydrostatic drive so that is not a problem. Suction pipe looks like it has a banjo bolt so I am guessing that is where the screen is???
Thanks

Kubota B8200 hyds problems

old

Well-known Member

ramtuff

Member

Tx Jim

Well-known Member

ramtuff

Member

Dean

Well-known Member

old

Well-known Member

Similar threads