hole in roof

amo · Sep 21, 2013

I have a small hole in the plastic roof on a Kubota, maybe an inch by 1/4 inch. What is the best way to patch it other than Duct Tape??
Thanks Amo

Paul from MI · Sep 21, 2013

So what's the problem with duct tape?

Bruce from Can. · Sep 21, 2013

1/4" bolt with a rubber washer

Tom jd50 · Sep 21, 2013

How about some type of epoxy. I patched a hole in an ATV sprayer tank that had a hole rubbed in it. Still holding several years later. Some can be painted over also I think.

GordoSD · Sep 21, 2013

Bondo

rrlund · Sep 21, 2013

Fiberglass repair kit. A 2 part epoxy with cloth like mesh that's easy to work with and dries like iron.

Bruce from Can. · Sep 21, 2013

exspantion foam,for filling cracks around windows. Spray it on , cut off extra with a utility knife, sand it smooth then paint.

retired farmer · Sep 21, 2013

Rots off after awhile.

JerryS · Sep 22, 2013

Lots of things would likely work; I'd probably use hot glue for quick and easy.

BIG ED · Sep 22, 2013

The silver tape used to patch van trailers.It will be there a while.

MarkB_MI · Sep 22, 2013

It will help if you can find out what the material is. If there's a triangular recycling symbol on the part, you can look it up and determine what it is. Then you can determine whether it can be repaired with adhesives or if it has to be thermally welded. Harbor Freight has cheap tools for thermal welding, although I can't say I've had real good luck when I've tried.

Wile E · Sep 22, 2013

JB weld?
Or a 2 part epoxy.

hole in roof

amo

Member

Paul from MI

Well-known Member

Bruce from Can.

Well-known Member

Tom jd50

Member

GordoSD

Well-known Member

rrlund

Well-known Member

Bruce from Can.

Well-known Member

retired farmer

Well-known Member

JerryS

Well-known Member

BIG ED

Member

MarkB_MI

Well-known Member

Wile E

Well-known Member

Similar threads