Continental Engine Parts

hamel01 · Sep 11, 2013

I have a Continental 4cyl G193 that i need to get some parts for. What has everyone found as the best place? I went to our local parts store the other day and they where like a deer in the head lights...

Anonymous-0 · Sep 11, 2013

Have you tried looking at adds in Trade-A-Plane, an aircraft publication. Forty years ago I used to get parts very economically from Fresno Airmmotive for Continental A 65 and C85 engines. I would try google , etc.

Areo

old · Sep 11, 2013

Depending on where your at I have a complete 4 cylinder Cont. engine that when I pulled it out still ran. Not sure the size of it just know it is an old flat head

redtom · Sep 11, 2013

A lot of forklift dealers have access to cont parts. Most internals are the same. Just have to watch when it comes to cranks and front covers etc where hookups occur.

hamel01 · Sep 11, 2013

The main part I need is the exhaust manifold. There is a crack in it where the muffler bolts on. I may be able to get it repaired but wanted it check on a cost for a replacement. Other than that the engine runs fine. May do some new plugs and wires but that's about it.

M Nut · Sep 11, 2013

Bought all engine parts for a Massey Harris pony N62 motor through National Bushing.

Billy Shafer · Sep 11, 2013

Try P A Ross in Dallas Texas. They were still a dealer as of 2008.

grs0820 · Sep 11, 2013

There is a outfit in Ill, Montes, Always have what i needed 1 800-228-2625

Dieseltech · Sep 11, 2013

See if a G176 has a manifold like yours, maybe an aftermarket one will work.

Jim in MN · Sep 11, 2013

Keep us posted if you find one. I have a rotten one on a Massey 302 that I need to do something about.

Continental Engine Parts

hamel01

Member

Anonymous-0

Well-known Member

old

Well-known Member

redtom

Well-known Member

hamel01

Member

M Nut

Well-known Member

Billy Shafer

Well-known Member

grs0820

Member

Dieseltech

Well-known Member

Jim in MN

Member

Similar threads