(800) 853-2651
SHOP NOW

transmision oil filter housing and T fitting for hydraulic s

J

James Vandendries

New User
Does anyone have a transmission oil filter housing with the fitting on it for return oil from a hydraulic valve for a loader for my John Deere 3010? If so I would like to possibly purchase one. Also looking for the T fitting that would go on the supply line under the brake pedals to be able to put a hydraulic fitting on for supply to a loader valve for the same tractor. I purchased a loader, but have only one set of rear remotes and want to plumb directly into the supply and return for the hydraulics. If anyone can help even with just the part #"s it would be greatly appreciated! Thanks! Jim
 
Jim - this subject is discussed a lot on the JD forum. Here's a link to just one of the discussions. You can do a search and find all kinds of info on the subject. Good luck.
Paul
Loader plumbing
 
You dont need to "buy" one.Lots are made by drilling and then threading or brazeing the correct fitting to the cast cover.
 
If it were my tractor I attach the return hose to the rockshaft return line(2nd photo) rather than contend with hose on a ported filter cover every time I had to change hyd filter. The ported filter cover(T31170) isn't even listed in the 3010 parts catalog
 
Thanks alot for the info fellas! I greatly appreciate it! A local fella told me the same thing about the filter housing cover with it destroying the filters, but you guys cleared it up perfectly for me! Again I do greatly appreciate it!
 
(quoted from post at 01:00:20 08/27/13) You dont need to "buy" one.Lots are made by drilling and then threading or brazeing the correct fitting to the cast cover.
Click to expand...

What you state is true but on the factory ported filter cover the fitting for attaching hose is angled so filter doesn't take the direct return hose pressure.
 
You must log in or register to reply here.

Similar threads

M
JD 3010 hydraulic fitting
Replies
9
Views
346
FWB in SK
F
J
Advice needed on adding hydraulic remote for quick attach on industrial loader tractor
Replies
10
Views
599
jacks
J
B
Crank Driven Hydraulic Pump Oil
Replies
3
Views
510
Bill VA
B
B
  • Question
Wain Roy Backhoe
Replies
2
Views
254
Andy Wickiser
A
flooder1997
oil filter housing international 756
Replies
5
Views
300
caterpillar guy
C
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top