JD 2555 mfwd hub disassembly

Anonymous-0 · Aug 16, 2013

The bearings went out in the left front wheel of my 2555 4x4. Took off the wheel and split the hub exposing the planetary gears. Took off the clip and washer from the shaft inside. How does the inside section of the hub separate from the knuckle?

RodinNS · Aug 16, 2013

Is there a ring of bolts holding the ring gear on the spindle? If so... remove them. Then you need to force the ring off it's dowels. I normally use a couple of chisels to evenly work it off the spindle. Once you do that you should see the bearings... then you pull the hub off the spindle. Just be careful of the ring gear. Some of them use cast parts and they can be broken... Whatever you do... DO NOT attempt to use a jaw puller to remove that ring gear or it WILL shatter.

Rod

Anonymous-0 · Aug 17, 2013

Thanks. Got'er apart today and installed the bearings and seal.

JD 2555 mfwd hub disassembly

Anonymous-0

Well-known Member

RodinNS

Well-known Member

Anonymous-0

Well-known Member

Similar threads