535 jd baler pump

gary stanley · Jun 1, 2013

can someone tell me how this pump turns off and on

Tx Jim · Jun 1, 2013

If all springs are in place when bale reaches preset diameter the twine mechanism unlatches and allows pressure to be applied to belt thus causing pump to turn creating pressure to move twine arm. When twine arm goes fully right a mechanism shift hyd valve to cause twine arm to move back left. When tying cycle is complete and bale ejected twine mechanism is intended to reset when gate is closed relieving pressure on twine pump belt and shifting hyd valve the opposite direction(if valve isn't sticking from dirt/rust).

gary stanley · Jun 2, 2013

thanks jim just purchased this baler and am trying to
understand everything before i get to the field

Tx Jim · Jun 2, 2013

Gary
Look for hay/dirt buildup on the top of hyd valve. This buildup can cause the hyd valve not to shift properly causing twine wrap problems.

535 jd baler pump

gary stanley

New User

Tx Jim

Well-known Member

gary stanley

New User

Tx Jim

Well-known Member

Similar threads