Pickup motor update

Went by the place friend bought the engine from this morning. Guy says sorry but it is out of warranty. Yes I know that; by 2 weeks. Ask why it took so long to get installed and I told him the story. Gave him a different attitude real quick.

So he calls the rebuilder in Dallas to set up return. Rebuilder says OK but lets check a few things first. First thing he says.....
No get ready cause I would never have seen this in a million years......
How is the pickup tube mounted???
Sure enough it was wrong. Guy says common problem.

He had the pickup tube mounted below the plate and it was hitting bottom of oil pan starving motor of oil.
Here is a picture of how it should be.

a116979.jpg


a116980.jpg


This moves the pickup tube up 1/2 inch an gives me about 3/8 to 7/16 space between the pan and pickup.

Now if I can get my helper (grandson) to stop running off with the tools we might get something done.
Sure hope it works this time.

a116981.jpg
 
Glad you got it worked out. Bless You for helping those folks. I think your partner might just need to borrow those tools for his projects..:) He's a fine looking feller.
Ron
 
Well I guess I was counting my chickens before they hatch.
Got the motor back together far enough I could put oil in it and run pump with a drill.
10 lbs pressure with 3/8 electric drill running as fast as it could.
If you take gauge off it pumps plenty of oil but just will not build up pressure.
So back to the shop we go.

We will get this figured out it just may take longer than I thought.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top