Vermeer 605 j

August Lewis · May 27, 2013

I recently purchased a Vermeer 605 j baler. I was wondering if there is a certain way the 4 Hydraulic hoses need to be attached. Also theere is not control box, how is the string tie engaged and cut? Waiting on manual any ideas or suggestion on this machine would be useful. Thanks!

Erik Ks farmer · May 27, 2013

Those 4 hoses are two sets. One set raises/lowers the tailgate and the other is most likely for hydraulic twine tie, should be a cylinder the controls the twine arm.

Hogleg · May 28, 2013

You can follow the hoses. On my 605H I have colored tape on them. Red for twine and blue for gate. I have one wrap on one and 2 wraps on the other so that I get them aligned so that the levers always do the same operation forward and back.

haytools dot com has some pdfs of manuals, check there to see if they have one close to yours. Best to have the exact manual but maybe they can help until yours arrives.

John

steve wi · May 28, 2013

you can download manuals right from Vermeer website at no cost.

Vermeer 605 j

August Lewis

Member

Erik Ks farmer

Well-known Member

Hogleg

Member

steve wi

Member

Similar threads