Injector removal

Anonymous-0 · Feb 12, 2013

I aquired a ford 801 select o speed tractor I am told it is a 63 or 64. It"s been sitting for several years. And I wanted to turn the engine over by hand first. It will turn about a quarter revolution. I want to pull the injectors to let any water out if any and to make sure the crank isn"t broke. How do the injectors come out? I don"t see anyplace for a wrench or socket to unscrew them. Thank you!!

Dieseltech · Feb 12, 2013

Injectors are under valve cover.

Anonymous-0 · Feb 12, 2013

They look like they are in the head, so there is a set screw or keeper under the valve cover?

Dieseltech · Feb 12, 2013

They are held down with two bolts each, rocker arms/ push rods need moved to get them out.

Anonymous-0 · Feb 12, 2013

Thank you so much!!!

showcrop · Feb 13, 2013

I just removed the injectors from my 971 yesterday. They were a little tough to get at due to the close quarters compared to a larger motor. Finally a found that I could get them by tapping a long screwdriver under the ears.

Injector removal

Anonymous-0

Well-known Member

Dieseltech

Well-known Member

Anonymous-0

Well-known Member

Dieseltech

Well-known Member

Anonymous-0

Well-known Member

showcrop

Well-known Member

Similar threads