Another Project finished

Acfarmer89 · Feb 1, 2013

Another project off the list. Wanted to have a quick-hitch for our skid loader so I could use a 3pt. bale spear/ 3pt. post driver or anything really that is 3pt. hitch. Wondering if I could rig up a hydraulic pump to run off the auxiliary hydraulics to run a small brush hog. Think it would work?

Anonymous-0 · Feb 1, 2013

If your skidder has enough hydralic flow it works good. I don't have one ,but an implement dealer close by converts them all the time to run off skidloaders.

Mark W. · Feb 1, 2013

Looks great. Is that a CC 70 or 100 hiding?

Anonymous-0 · Feb 1, 2013

It depends on your particular skid steer. Does it have enough flow/pressure and does it have enough cooling capacity. A lot of attachments like mowers, snow blowers and tillers don't work very well unless you have high flow aux. hydraulics.

Acfarmer89 · Feb 1, 2013

(quoted from post at 23:43:43 02/01/13) It depends on your particular skid steer. Does it have enough flow/pressure and does it have enough cooling capacity. A lot of attachments like mowers, snow blowers and tillers don't work very well unless you have high flow aux. hydraulics.

We have a New Holland LX465 and a Case 1840 at our disposal.

Info on the 1840- http://www.ritchiespecs.com/specifi...p;make=Case&model=1840&modelid=108864

Acfarmer89 · Feb 1, 2013

(quoted from post at 22:45:48 02/01/13) Looks great. Is that a CC 70 or 100 hiding?

Not sure, owner wanted fenders put on it. Will have to ask him.

Edit: This help you any?

Mark W. · Feb 2, 2013

7 horse would be a 70 10 horse 100.

Another Project finished

Acfarmer89

Member

Anonymous-0

Well-known Member

Mark W.

Member

Anonymous-0

Well-known Member

Acfarmer89

Member

Acfarmer89

Member

Mark W.

Member

Similar threads