case ih 885 power shift

danny morgan · Jan 29, 2013

if the solenoid that is mounted behind the battery is out will that keep the power shift unit from working.

pete 23 · Jan 29, 2013

The solenoid powered up supplies oil to the direct drive (high) clutch pack. With solenoid not working, or not powered up the oil is directed to the over running bellville washers to prevent free wheeling but the actual drive is through the one way sprag unit. So, if sprag is good you will be able to pull a load. If sprag is bad you may still be able to move with the belleville washers but not pull any load.

case ih 885 power shift

danny morgan

New User

pete 23

Well-known Member

Similar threads