Anonymous-0
Well-known Member
THE P.T.O ON MY 51 SUPER C WILL NOT DIS-ENGAGE.THE LEVER MOVES BACK AND FORTH AND I HERE WHAT SOUNDS LIKE IT CLICKING ,BUT THE P.T.O. WON'T STOP TURNING.IS IT COMPLICATED TRYING TO REPAIR IT.
- Thread starter Anonymous-0
- Start date
Janicholson
Well-known Member
Lift the rear about 18 inches, or lower the front to prevent loss of lube, and remove the unit. There is a mechanical coupling that is either broken, or the shifting fork that moves it is worn, bent, or broken. Jim
gene bender
Well-known Member
The sleeve that moves back and forth has a grouved flange on it and the lever has a small tip that enguages that flange to move it back and forth. It probably is worn off. You will need to remove the assy to find the problem. Ive fixed several. Some fun will occur reinstalling. You will also need to back off the slotted screw as it loads the lever in position. After reinstalling the assy you will need to tighten that spring again to load the levers action.
Anonymous-0
Well-known Member
thanks guys for the info.it is a must to fix due to the danger.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy