White 2-150 turbo

Zach Scherf · Dec 16, 2012

Just went through our white 2-150 and did some engine work.. Considering putting a turbo on it for more power pulling the chisel plow and discbine. What you Guys think? Would it burn up the new clutch or motor?

Dalet · Dec 16, 2012

I can't imagine you would need a turubo for a discbine. I would leave it alone and let it be what it was.

showcrop · Dec 16, 2012

You should post this on the Oliver forum. There will be people there that will know things like weather or not your motor has oil cooled pistons and all that stuff that turboed motors need in order to last.

G1355 · Dec 16, 2012

If you put the post anywhere put it on the minneapolis moline one. It has a minneapolis moline motor in it and turbo charging shouldn't hurt it. The g1355 same tractor some had a turbo dealer installed, had a differant name than turbo, but it was a turbo can't think of the name now. If you turn it up past 180hp the clutch will slip, then you will need to put in a 2-180 white clutch

G1355 · Dec 16, 2012

Just thought of it. it was on the tip of my tounge before. It was a altitude compensator, installed for high altitudes, but was a turbo just gave it a fancy name but was dealer installed on some of the 585 mm motors

OLarry from MD · Dec 17, 2012

Don't do it this engine has a history of problems with or without a turbo.

G1355 · Dec 17, 2012

This engine is fine, all motors have a bad one in a bunch and you must of had one of them because turboing won't hurt it,there a dependable motor especially with the external oil pump which you 2-150 has. It will be fine If you turbo charge it.

White 2-150 turbo

Zach Scherf

Member

Dalet

Member

showcrop

Well-known Member

G1355

Well-known Member

G1355

Well-known Member

OLarry from MD

Member

G1355

Well-known Member

Similar threads