1066 hydraulics

trencherman · Nov 23, 2012

Getting low pressure hydraulic light on 1066 when it warms up(chisel plowing). When you engage the torque it takes longer and longer to engage as it gets warmer. Steering is little hard also. When cold everything works fine. Suspect a relief valve in the MCV valve. Any ideas?? thanks

the tractor vet · Nov 23, 2012

I would say that your MCV pump is getting tired .

the tractor vet · Nov 23, 2012

I would say that your MCV pump is getting tired .

Tom Barto · Nov 24, 2012

These guys would be proud of me...

I've been subsoiling with a 1566 for the past 3 weeks - lots of hydraulic issues and low pressure at the MCV...

Before you try anything - replace your hydraulic filter...mine gave me plugging issues at only 6hrs old...

I replaced the mcv pump and rebuilt the valve...found nothing out of place but some older o rings...worked for a while longer and then quit again...neighbor told me to replace the filter...he used to have to replace his sometimes every 9days...I did...seems to come back to life.

Will begin rippin again today

1066 hydraulics

trencherman

New User

the tractor vet

Well-known Member

the tractor vet

Well-known Member

Tom Barto

Member

Similar threads